LEDlux 200VA LED Electrical Dimmer

SKU: 290998

RRP $81.77 ex gst

- +
SKU 290998
Product Type Accessories
Brand Lucci LEDlux
Width / Diameter (mm) 23
Depth (mm) 23
Height (mm) 51.5
Voltage 240V
Globe Type LED
Globe Quantity 0
Wattage (Max) 200W

The Ledlux LED 200VA Electrical dimmer is suitable for 240V dimmable LED loads, maximum LED load 150W. This dimmer comes without a switch wall plate as it is designed to be retrofitted to your existing switch wall plate. This dimmer is a trailing edge dimmer. The Lucci dimmer does not have a minimum load requirement. This dimmer can also be set to a dimming percentage and you can dim down to 0%. Please note this dimmer is not suitable for use with ferromagnetic transformers or use with transformer, only LED drivers. Click Here for Installation Instructions

LEDlux 200VA LED electrical dimmer


To find out about the warranty that applies to this product, click here to Contact us


To make a warranty claim, call the Beacon Lighting Lucci warranty hotline on 1800 602 243. For more information, click here for our returns & warranties policy, or email warranty@beaconlighting.com.au.

Customer Reviews

You're reviewing LEDlux 200VA LED Electrical Dimmer

3 Item(s)

per page
Definitely needed with bright LED bedside lights
Review by Ades
Dims well and used with matching Lucci lights LEDLUX Barossa dimmable LED spot in antique nickel. These are used as bedhead lights and were too bright without the dimmer.
For bedside use the dimmer is highly recommended.
Quality but pricey
Review by Winco
Quality dimmer. Top end in price though. My experience with bottom dimmer level mirrors Alex's experience. However, you can tune the dimmer to have a minimum and maximum setting and this can simply be done with a tiny screwdriver and the adjustment on the side of the dimmer.
Good but some issues at bottom dimmer level
Review by Alex
Seem to dim well and evenly down to a certain point, but after this have difficulty at the low (dimmer) end and tend to slightly pulsate (just barely noticeable). They also completely turn off before the absolute bottom setting. However I understand this is not uncommon due to the way LED works (dim control is much harder than standard lights).

Write Your Own Review

How do you rate this product?

Choose a star rating